80–110 mm Cabinet Leveling Feet
Approx. 3.15–4.33 in.
A lower starting height for installations that need a leg setting between 80 and 110 mm.
Pack options
2 Pieces · 4 Pieces · 12 Pieces · 48 Pieces
-
files/Cabinet-Leveler-Legs-Adjustable-5-to-6-Height-Range-Berta-Store-32205412335864.png
-
files/Cabinet-Leveler-Legs-Adjustable-5-to-6-Height-Range-Berta-Store-32205412368632.png
-
files/Cabinet-Leveler-Legs-Adjustable-5-to-6-Height-Range-Berta-Store-32205412401400.png
-
files/Cabinet-Leveler-Legs-Adjustable-5-to-6-Height-Range-Berta-Store-32205412434168.png
-
files/Cabinet-Leveler-Legs-Adjustable-5-to-6-Height-Range-Berta-Store-32205412466936.png
-
files/Cabinet-Leveler-Legs-Adjustable-5-to-6-Height-Range-Berta-Store-32205412499704.png
Cabinet Leveler Legs – Adjustable 5" to 6" Height Range
- Regular price
- $19.99
- Regular price
- $19.99
Berta Store · Cabinet Hardware
Related Cabinet Leveler Legs
Need a different height range? Compare these two alternatives to the 120–150 mm model.
100–130 mm Cabinet Leveler Legs
Approx. 3.94–5.12 in.
Consider this range when your required leg settings sit between 100 and 130 mm.
Pack options
2 Pieces · 4 Pieces · 12 Pieces · 48 Pieces
Higher-base planning
Taller cabinet support without a “6-inch” fit assumption
Use the 120–150 mm cabinet leg range when the design calls for a higher support setting. It reaches 150 mm, approximately 5.91 inches. It is not a full 6-inch support: 6 inches is 152.4 mm.
This distinction matters when matching an existing cabinet base or designing a continuous toe-kick. Work from the actual adjustment-height requirement, and confirm how the mounting assembly contributes to the installed measurement.
Example: a raised base needing 132–146 mm settings
The complete span is inside 120–150 mm. The 100–130 mm option cannot reach either end of this example. If one required setting were 118 mm, however, the taller model would also be unsuitable.
Coordinate the toe kick, end panels and floor
Toe-kick face
Choose the finished face height and setback from the cabinet design. The decorative face and adjustable leg are separate components; confirm the compatible clip or fastening system.
Visible cabinet ends
Review how end panels meet the finished floor and adjacent cabinets. A higher support setting can leave an exposed gap unless the finishing details are planned around it.
Access beneath the cabinet
Check whether the planned clearance is usable after adding the toe-kick face and hardware. More leg height alone does not guarantee access for cleaning equipment, pipework or service.
More height is not more load capacity
All three listed ranges offer 30 mm of height travel. Choose this one for its higher starting point, not as an automatic upgrade for a heavier cabinet or countertop.
Cabinet support depends on the actual leg rating, load distribution, structural fixing locations and required anchoring. Do not treat the number of legs in a pack as a load calculation, or extend the threaded adjustment beyond the stated limit.
Plan the panels for a raised cabinet installation
White and light-gray cabinet components
Compare White Melamine Baltic Birch plywood and Light Gray Prefinished Plywood for the visible finish of your cabinet components. Choose the leg range from measurements, not the panel color.
Modern cabinet fronts
Explore Acrylic MDF panels for cabinet fronts and other design-approved components. Confirm structural support and fastening separately. Use the cut-list calculator for panel layout, not for a leg-support specification.
Questions about the 120–150 mm cabinet legs
Will these legs reach a true 6 inches?
No. Six inches equals 152.4 mm, beyond the 150 mm listed maximum. Use a different specified support solution when the actual required setting exceeds this range.
Can I use this model at 125 mm?
125 mm lies inside both 100–130 mm and 120–150 mm. Check the full support span and adjustment room at the other leg locations before choosing between them.
Are the taller legs a stronger option for a stone countertop?
Height alone does not establish a higher capacity. Confirm the rated leg configuration, cabinet support layout, countertop requirements and anchoring for the complete installation.
Does the taller model provide more room for uneven floors?
It starts higher, but its total adjustment span is still 30 mm. The higher starting point does not add travel beyond what the shorter models provide.
Can I choose a taller range to solve a damp floor?
Do not use cabinet elevation as a substitute for repairing leaks or dampness. The cabinet materials and their edges still need suitable protection; these legs do not create a waterproof installation.