files/10-Pairs-14-Inch-Full-Extension-Ball-Bearing-Drawer-Slides-Berta-Store-32205575192824.png
files/10-Pairs-14-Inch-Full-Extension-Ball-Bearing-Drawer-Slides-Berta-Store-32205575160056.png
files/10-Pairs-14-Inch-Full-Extension-Ball-Bearing-Drawer-Slides-Berta-Store-32205575225592.png
files/10-Pairs-14-Inch-Full-Extension-Ball-Bearing-Drawer-Slides-Berta-Store-32205575127288.png
files/10-Pairs-14-Inch-Full-Extension-Ball-Bearing-Drawer-Slides-Berta-Store-32205575422200.png
files/10-Pairs-14-Inch-Full-Extension-Ball-Bearing-Drawer-Slides-Berta-Store-32205575454968.png

14 Inch Drawer Slides – 10 Pairs Full Extension Ball Bearing - Berta Store

14 Inch Drawer Slides – 10 Pairs Full Extension Ball Bearing

Regular price: $64.99

Package Includes 10 Pairs (20 pcs)

Quantity

Unit price

$64.99

Warehouse pickup

Pennsauken, NJ Usually ready in 1 hour

Available

Pickup details

PICKUP AT PENNSAUKEN

9040 Pennsauken Highway
Pennsauken Township, NJ 08110

Please wait for your pickup-ready confirmation before visiting. Availability for the selected size is shown above; readiness and quantity must be confirmed before pickup.

Get directions

Regular price: $64.99

Product Description

Berta Store · 14 Inch Standard Slides

14 Inch Full Extension Drawer Slides

Build or replace drawers planned around a 14-inch side-mount slide with this 10-pair full-extension ball bearing pack. This length sits between the 12- and 16-inch options and is suited to cabinet or furniture drawers whose mounting layout calls for a 14-inch rail.

Full extension provides access toward the back of the drawer. These are the standard-closing slides, not the separate soft-close model.

14 inch length
10 pairs per pack
Side mount
Full extension

Current pack pricing and availability are shown with the product options above.

Specifications

Nominal slide length	14 inches; 355.6 mm by unit conversion
Extension / motion	Full extension / ball bearing
Mounting type	Side mount
Closing action	Standard; not the separate soft-close model
Material / finish	Cold-rolled steel / zinc-plated
Listed item dimensions	14 × 0.5 × 1.8 inches (length × thickness × profile height)
Pack quantity	10 pairs; 20 slide assemblies for up to 10 same-length drawer installations
Published load figure	Up to 100 lb in the product listing. Confirm the supplier’s rating and installation conditions for the complete drawer. Pack quantity does not multiply one drawer’s capacity.

What is included

10 pairs of 14-inch full-extension ball bearing side-mount drawer slides
Face-frame brackets, as listed for this pack
Installation screws

A 14-inch option for a measured mounting plan

Consider this pack for office furniture, cabinet storage or vanity drawers that have been designed for a 14-inch side-mount rail. Select the length from the drawer and usable mounting space—not simply the room type or outside cabinet depth. Check any plumbing, rear bracket or cabinet back that could interrupt the slide’s path.

Before fastening: confirm the required side clearance, mounting positions and screw length for your cabinet construction. The listed 1/2-inch slide thickness is an item dimension, not a complete installation tolerance. Test one drawer before repeating the layout across the pack.

Compare other drawer-slide systems

Browse all drawer slides, compare the 14-inch soft-close side-mount option, or explore concealed undermount drawer slides. Switching systems may require different drawer dimensions, brackets or mounting details.

Berta Store · Installation Guide

14-inch drawer slides

Drawer Slide Installation Video

Watch Berta's installation video for full-extension, ball-bearing side-mount drawer slides before starting your 14-inch drawer project.

Fit & Project Planning

Choosing 14 inch ball bearing drawer slides

A 14-inch drawer slide is an intermediate length, not an adjustable-length rail. Use the checks below to compare it with an existing runner, plan the support behind a face frame and decide whether standard or soft-close movement fits the project.

Keep slide length separate from drawer travel

Measure the closed metal slide for a replacement and compare that measurement with the drawer-box length and usable mounting depth. Do not use the decorative drawer-front width or the open length of the extended rail as the size. “Full extension” describes the opening action; it does not mean that this 14-inch slide can be adjusted to 12 or 16 inches.

The adjacent 12- and 16-inch options below are alternatives only when their mounting layouts suit the drawer. A longer rail may conflict with the cabinet back, while a shorter rail changes the support and travel arrangement. Do not cut a telescoping slide to make it fit.

Check the space behind a face frame

A face frame can project inward from the cabinet side. Plan a secure, aligned mounting arrangement rather than fastening the two rails to surfaces at different offsets. This pack lists face-frame brackets, but the cabinet’s construction still determines how the slide and its rear support should be attached.

Check the clear depth to the actual obstruction or supporting surface, including the space needed by rear hardware. Having just 14 inches from the cabinet front to its back does not by itself confirm that the complete installation will fit.

Do not treat a 350 mm label as a fit guarantee

Fourteen inches converts to 355.6 mm. Metric drawer runners sold under a nominal 350 mm label may use their own dimensions, hole patterns and clearances. Compare the actual hardware drawings and closed lengths rather than assuming the labels are interchangeable.

Count the 14-inch drawers separately

A cabinet project may use more than one slide length. Keep the 14-inch drawer count separate from any 12- or 16-inch drawers because these packs are not mixed-length assortments.

Quantity example: 14 drawers using this length require 14 pairs. Two 10-pair packs supply 20 pairs, leaving 6 spare pairs. That is a quantity calculation, not a confirmation that 14-inch slides fit every drawer in the project.

14 inch drawer slide questions

Are these 14-inch slides soft close?

No. This is the standard full-extension ball bearing pack. Berta’s separate soft-close side-mount product has a 14-inch option, linked below. Compare its installation requirements before changing systems.

Can I replace a 14-inch runner by matching only the length?

No. Also compare side clearance, mounting holes, the cabinet construction, brackets and the drawer’s attachment points. The correct nominal length is only one part of replacement compatibility.

Does one pack provide hardware for ten drawers?

One pack contains ten pairs. When one pair is used as a left-and-right set, that supplies slides for up to ten drawers of the same required length. Confirm the complete installation requirements for each drawer.

Is there a matching 14-inch concealed undermount option?

The linked Berta undermount family currently lists 12-, 15-, 18- and 21-inch sizes, not 14 inches. It is a different mounting system; do not substitute a 15-inch undermount merely because its length is close.

Compare Other Drawer Slides

Find other sizes using the length selector above or browse the Drawer Slides collection. Compare each product's mounting specifications before substituting a different system.

14 Inch Drawer Slides – 10 Pairs Full Extension Ball Bearing

Product Description