Standard side mount
10 Inch Drawer Slides
A 10-inch standard option to compare with your required rail length and mounting space.
10 pairs · 10 in. nominal length
Full extension · Ball bearing
Full extension · Ball bearing
-
files/10-Pairs-12-Inch-Full-Extension-Ball-Bearing-Drawer-Slides-with-Screws-Berta-Store-32205572178168.png
-
files/10-Pairs-12-Inch-Full-Extension-Ball-Bearing-Drawer-Slides-with-Screws-Berta-Store-32205572276472.png
-
files/10-Pairs-12-Inch-Full-Extension-Ball-Bearing-Drawer-Slides-with-Screws-Berta-Store-32205572309240.png
-
files/10-Pairs-12-Inch-Full-Extension-Ball-Bearing-Drawer-Slides-with-Screws-Berta-Store-32205572210936.png
-
files/10-Pairs-12-Inch-Full-Extension-Ball-Bearing-Drawer-Slides-with-Screws-Berta-Store-32205572243704.png
-
files/10-Pairs-12-Inch-Full-Extension-Ball-Bearing-Drawer-Slides-with-Screws-Berta-Store-32205572342008.png
12 Inch Drawer Slides – 10 Pairs Full Extension Ball Bearing
- Regular price
- $55.99
- Regular price
- $55.99
Berta Store · Installation Guide
12-inch drawer slidesDrawer Slide Installation Video
Watch Berta's installation video for full-extension, ball-bearing side-mount drawer slides before starting your 12-inch drawer project.
Fit & Project Planning
A 12 inch rail needs the right width and mounting space
Treat drawer width as a separate measurement
Correct length does not solve an opening that is too narrow or out of square. Measure the cabinet opening at the front and rear and compare the required side clearance with the drawer-box outside width. Keep the rail assemblies parallel according to the installation instructions.
Use a clearance formula only with confirmed values
The planning relationship is drawer-box outside width = effective mounting opening minus the required clearance on both sides. For example, an 18-inch effective opening with a confirmed 1/2-inch allowance per side would suggest a 17-inch box. This is a conditional example, not a substitute for the product installation drawing.
Decide the mounting system before fabricating
This page offers standard side mounts. The linked soft-close side-mount and undermount families both list a 12-inch option, but an undermount drawer needs its own construction details, locking hardware and clearances. Do not cut one box design assuming all three systems will fit it.
Planning example: Twelve inches is 304.8 mm as a unit conversion. Check actual product measurements when replacing a nominal 300 mm slide; the names are not an assurance of a common mounting pattern.
12 inch drawer slide questions
Can I use these in a frameless cabinet?
A side-mount installation can be planned against suitable cabinet sides, but verify the mounting surface, drawer clearance and fastening instructions for the actual cabinet.
Do I need the face-frame brackets in every installation?
Not necessarily. The appropriate support arrangement depends on the cabinet construction. The listed pack includes brackets, but their presence does not replace a fit check.
Is a 12-inch undermount a direct replacement?
No. The nominal length may match, but mounting beneath the drawer introduces different box dimensions and hardware requirements.
Compare nearby standard lengths
Choose a different length only when it suits the complete drawer and cabinet mounting plan. These alternatives retain the standard side-mount format.
Standard side mount
14 Inch Drawer Slides
A 14-inch standard option to compare with your required rail length and mounting space.
10 pairs · 14 in. nominal length
Full extension · Ball bearing
Full extension · Ball bearing
Compare closing action and mounting style
The products below are different systems, not a promise of direct replacement compatibility. Read the selected product’s own sizing and installation requirements.
Different closing action
Soft-Close Side-Mount Slides
Compare the 12-inch soft-close side-mount option. Check its mounting instructions and clearances before switching.
10-pair kit · Side mount
Different mounting system
Soft-Close Undermount Slides
A concealed 12-inch alternative for a compatible drawer box. Same nominal length does not mean the mounting system is interchangeable.
10-pair kit · Concealed undermount